Contact：Ms Pan
Tel：15962651085
Mobile：400-8655-988
Tel：0512-50332040
Fax：0512-50312036
mailbox：vera@hqairfilter.com
Website：www.hq-airfilter.com
Address: No. 199, Chensong Road, Yushan Town, Kunshan City, Suzhou, Jiangsu Province
Product Features:
Metal frame, metal mesh support, stable structure
Suitable for high humidity air environment
Large filtration area, low resistance
Filter material from the table to the inside, from thin to dense production process molding
High amount of dust
Product efficiency:
Efficiency level: G3, G4, M5 (EN779)
Product Application:
Initial effect folding plate filter is widely used for its stable structure, easy installation, large filtration area, low resistance, high dust capacity and other characteristics
In industrial and commercial, civil and other kinds of ventilation system initial filtration section
Installation method:
Wind direction: the direction indicated by the arrow on the product label
Direction: The height border of the product is perpendicular to the ground, that is, the filter is perpendicular to the ground. Under special circumstances, the height and width can be switched, and can also be installed horizontally.
Product material and operating conditions:
| frame | Aluminum alloy/galvanized iron/stainless steel |
| Filter material | Polyester fibre |
| The filter material supports the protective mesh | Barbed wire |
| Maximum service temperature | 90℃ |
| Maximum working humidity | 100%RH |
Product selection and naming rules:
Corresponding curve of resistance and air volume:
The performance parameters
| Nominal size(inch) | Actual size(mm) | Surface wind velocity | Initial resistance(Pa) | ||
| WXHXD | WXHXD | m/s | G3 | G4 | M5 |
| 12×24×2 | 287×592×46 | 2.5 | 40 | 50 | 70 |
| 20×24×2 | 490×592×46 | 2.5 | 40 | 50 | 70 |
| 24×24×2 | 592×592×46 | 2.5 | 40 | 50 | 70 |
| 12×24×4 | 287×592×96 | 2.5 | 35 | 40 | 55 |
| 20×24×4 | 490×592×96 | 2.5 | 35 | 40 | 55 |
| 24×24×4 | 592×592×96 | 2.5 | 35 | 40 | 55 |
| Note: 1, the initial effect filter recommended final resistance 250Pa; 2, resistance tolerance is ±10%; 3, special size please contact sales personnel | |||||
